For Sale / Used Equipment the Waste Paper Industry / Balers / #722 Print »
IBS 46:3.
Presona Baler LP-100-CH2 made 2007.
Filling Opening: 1650mm x 1100mm.
Capacity = 500 cubic meters pro hour.
Capacity tons pro hour.
Material 30 kg pro cubic meter = 15 tons.
Material 50 kg pro cubic meter = 18 tons.
Material 100 kg pro cubic meter = 25 tons.
Bale size: 1100 x 750 mm x adj.length.
Baleweights Kg/m = 525 - 725 Kg/m.
Baleweights Bales L = 1,5m = 650 - 900 Kg.
Press Force: 100 tons.
Specific pressure: 120 N / cm
Max Oilpressure: 250 Bar.
Oil tank Volume: 2000 l.
Electric Motors: 2 x 45 KW.
Number of vertical strapping wires: 5.
Weight: 30 tons.

All above technical specifications are taken from Presona leaflets
This is one Presona Baler LP100CH2 in VERY GOOD CONDITION.

Working time 17500 hours.

The Baler is still in operation, will be dismantled week 6 - 2022.


22 11 2021 SOLD.
This is one Presona Baler LP100CH2 in VERY GOOD CONDITION.

Working time 17500 hours.

The Baler is still in operation, will be dismantled week 6 - 2022.
Electric Cabinet.
Electric Cabinet.
Operation Panel.
Big Sifferdisplay.
Wire Puller.
Power Pac with Air Cooler.
Power Pac with Oil Heaters.
Presona Tying System RN2P.
Picture from the Bottom Plate in the Baler.

VERY GOOD CONDITION.

The Thickness from the Bottom Plate where the Needles goes through and pick up the Wires are between 19 and 20 mm !!!!!

The reason why the Bottom Plate is so Good is the material pressed with the Baler.
Picture inside the Baler.

VERY GOOD CONDITION.
During October 2020 the 2 Pcs Mainpresser Cylinders from the Baler were changed against Brand New Mainpresser Cylinders from Presona in Sweden.
Both the Sidefriction Flaps are changed against " Stronger Model ".
Both the Sidefriction Flaps are changed against " Stronger Model ".
Wire Guides.
Wire Guides.
Bales made from the Baler.
Bales made from the Baler