Filling Opening: 1ī500mm x 1ī100mm.
Capacity = 340 cubic meters pro hour.
Capacity tons pro hour.
Material 30 kg pro cubic meter = 10 tons.
Material 50 kg pro cubic meter = 14 tons.
Material 100 kg pro cubic meter = 22 tons
Bale size: 1ī100 x 750 mm x adj.length.
Bale weights: 430 - 700 Kg.
Wires: 5 Vertical.
Press Force: 50 tons.
Specific pressure: 6,4 Kp / cmē
Max Oilpressure: 250 Bar.
Oil tank Volume: 600 l.
Electric Motor: 37 KW.
All above technical specifications are taken from Presona leaflets.
The Power Pac is longer back than normal on this Baler.
Of course possible to move closer to the Baler.
This Baler will be dismantled the 10-08-2018.
The Power Pac is longer back than normal on this Baler.
Of course possible to move closer to the Baler.
The Power Pac is longer back than normal on this Baler.
Of course possible to move closer to the Baler.
In the holes where the Needles operate up and down and the wear is most the dimentions of the bottom plate is between 9,0mm and 13,0 mm.
When the Baler was brand new the dimentions from the bottomplate was 15,0mm.
The light in the Operation Panel is very less and need to be repaired.
I donīt know what is wrong with this cylinder, but possible to be able to repair.
I donīt know what is wrong with this cylinder, but possible to be able to repair.